Thermal Imaging Camera
Thermal imagining camera used to find poor insulation points as well as compression air leaks. Displays a temperature range of -4°F to 1202°F on a 3.5” touchscreen with auto-orientation. Stores information JPEG images on an insertable SD card. Offers a manual focus lens with 4x continuous digital zoom. Compatible with smartphones or tablets via Bluetooth.
Combustion Analyzer
Combustion analyzer used primarily in boiler applications. It is used to measure up to 4 gases simultaneously. These gases range from O2, CO, NO, and NO2. Once recorded, they are displayed on a 3.5” color LCD screen where the layout can then be changed to best fit the user's need. From the results, the boiler efficiency can then be determined.
Light Meter
Used to measure the strength of the lighting in areas. Measures up to 2000 Fc. Allows users to find the efficiency of bulbs and an approximate number of lumens used in the application it is used.
Anemometer
Measures air velocity, airflow, and temperature.
Digital Anemometer
Used to measure air speed through hot-wire sensor, volumetric flow rate of air in CMM and CFM, air temperature in °C/°F and relative humidity (%RH)
Infrared Heat Sensor
This infrared heat sensor is the two-in-one IR and contact thermometers with a dot matrix display. With a menu interface the thermometers make complex measurements easy. Quickly navigate advanced features to adjust emissivity, start data logging, or turn on and off alarms. The thermometers can stand up to tough industrial, electrical, and mechanical environments.
Humidity/Temperature Logger
Measuring temperature over time. Monitor equipment or temperature sensitive areas. Monitoring building heating/cooling cycles.
Dissolved Oxygen Meter
Measures DO in a water sample. Useful at wastewater plants or industries with on-site water treatment.
Ultrasonic Flow Meter
Measures flow of water inside a pipe. Flow of water can be useful in finding volume of water being used, heat transfer capacity, etc.
Vibration Logger
Measures vibration at a fixed point over time. Good for checking when variably used equipment comes on or off.
Tachometer
Measuring shaft rotation. Useful in measuring motor or conveyor speed and efficiency.
3 Channel Pressure Logger
Logs pressure of a compressed air system over time. Not field tested.
Ultrasonic Compressed Air Leak Detector
Locating and measuring compressed air leaks. Also used for gas lines, on electric equipment, on steam traps, and on motor bearings.
Fluke Connect Current Meter
A self contained current meter. Good for simple logging of amperage only.
Hobo 4 Channel Logger
Used to log a variety of measurements over time. So far has been used to log 3 phase current for simple electrical analysis of motors, or other large equipment. Installation of current transducers requires qualified electric staff from the facility, or a hired electrician.
3-Phase True Power Meter
Used to log true power on a piece of equipment. Useful for looking at power use in depth. Helpful if looking into power factor concerns or other more complicated power issues.
Fluke Sonic Imager
Locating and measuring compressed air leaks. Displays leaks visually. Quicker at locating leaks than directional detector.
